• Office Time:                                                                                                                             
  • Marine Valves
  • Industrial Valves
  •            
Marine DIN PN10 Cast Iron Gate Valve(Yoke)

    Ref ID:199        
    1.End Type:Flange
    2.DN:40mm-400mm
    3.PN:10
    4.Design Standard:DIN3202-F4(FTF)
    5.End Standard:DIN2532

Main Material

    Body/Bonnet:  GG25
    Disc:  GG25/GSC-25N/BC6/GGG40
    Seat:  SS410/Gunmetal
    Stem:  SS410/BRASS

Applicable Scope

    Cold and hot fresh water,Saltwater,Lubricating oil,Steam etc.

Additional Info

    Trademark:   RIKEX Or OEM
    Painting:   Grey/Silver/Red/Blue Or RAL Color
    Packing:  Plywood case packing
    Transportation:   By Sea/Air/Express

Products Description

IMPA/ISSA PN DN Face to face Flange diam. Flange Pitch Flange Hole RIKEX ID
    (mm) L(mm) D(mm) C(mm) n*d(mm)  
755615 PN10 40 140 150 110 4×Ф18 199-01
755616 PN10 50 150 165 125 4×Ф18 199-02
755617 PN10 65 170 185 145 4×Ф18 199-03
755618 PN10 80 180 200 160 8×Ф18 199-04
755619 PN10 100 190 220 180 8×Ф18 199-05
755620 PN10 125 200 250 210 8×Ф18 199-06
755621 PN10 150 210 285 240 8×Ф23 199-07
755622 PN10 200 230 340 295 8×Ф23 199-08
755623 PN10 250 250 395 350 12×Ф23 199-09
755624 PN10 300 270 445 400 12×Ф23 199-10
  PN10 350 290 505 460 16×Ф23 199-11
  PN10 400 310 565 515 16×Ф27 199-12
  PN10 500 350 670 620 20×Ф27 199-13
  PN10 600 390 780 725 20×Ф30 199-14
     Note: 1.Outside screwed stem and yoke; Rising Stem; Non-rising Handwheel; Bolted Bonnet
               
IMPA/ISSA PN DN Face to face Flange diam. Flange Pitch Flange Hole RIKEX ID
    (mm) L(mm) D(mm) C(mm) n*d(mm)  
  PN10 40 140 150 110 4×Ф18 199-15
755632 PN10 50 150 165 125 4×Ф18 199-16
755633 PN10 65 170 185 145 4×Ф18 199-17
755634 PN10 80 180 200 160 8×Ф18 199-18
755635 PN10 100 190 220 180 8×Ф18 199-19
755636 PN10 125 200 250 210 8×Ф18 199-20
755637 PN10 150 210 285 240 8×Ф23 199-21
755638 PN10 200 230 340 295 8×Ф23 199-22
755639 PN10 250 250 395 350 12×Ф23 199-23
755640 PN10 300 270 445 400 12×Ф23 199-24
  PN10 350 290 505 460 16×Ф23 199-25
  PN10 400 310 565 515 16×Ф27 199-26
  PN10 500 350 670 620 20×Ф27 199-27
  PN10 600 390 780 725 20×Ф30 199-28
    Note: 1.Outside screwed stem and yoke; Rising Stem; Non-rising Handwheel; Bolted Bonnet
  2.Double pitch threaded stem(fast opening/closing) and drain plug
   
IMPA/ISSA PN DN Face to face Flange diam. Flange Pitch Flange Hole RIKEX ID
    (mm) L(mm) D(mm) C(mm) n*d(mm)  
755641 PN10 40 140 150 110 4×Ф18 199-29
755642 PN10 50 150 165 125 4×Ф18 199-30
755643 PN10 65 170 185 145 4×Ф18 199-31
755644 PN10 80 180 200 160 8×Ф18 199-32
755645 PN10 100 190 220 180 8×Ф18 199-33
755646 PN10 125 200 250 210 8×Ф18 199-34
755647 PN10 150 210 285 240 8×Ф23 199-35
755648 PN10 200 230 340 295 8×Ф23 199-36
755649 PN10 250 250 395 350 12×Ф23 199-37
755650 PN10 300 270 445 400 12×Ф23 199-38
  PN10 350 290 505 460 16×Ф23 199-39
  PN10 400 310 565 515 16×Ф27 199-40
  PN10 500 350 670 620 20×Ф27 199-41
  PN10 600 390 780 725 20×Ф30 199-42
     Note: 1.Outside screwed stem and yoke; Rising Stem; Non-rising Handwheel; Bolted Bonnet
  2.Drain plug; Grease nipple
IMPA/ISSA PN DN Face to face Flange diam. Flange Pitch Flange Hole RIKEX ID
    (mm) L(mm) D(mm) C(mm) n*d(mm)  
  PN10 40 140 150 110 4×Ф18 199-43
  PN10 50 150 165 125 4×Ф18 199-44
  PN10 65 170 185 145 4×Ф18 199-45
  PN10 80 180 200 160 8×Ф18 199-46
  PN10 100 190 220 180 8×Ф18 199-47
  PN10 125 200 250 210 8×Ф18 199-48
  PN10 150 210 285 240 8×Ф23 199-49
  PN10 200 230 340 295 8×Ф23 199-50
  PN10 250 250 395 350 12×Ф23 199-51
  PN10 300 270 445 400 12×Ф23 199-52
      Note: 1.Soft Seat
2.Outside screwed stem and yoke; Rising Stem; Non-rising Handwheel; Bolted Bonnet